How to install a metal roof? | Titan Northern Slate | Steel Canada Roofing and Siding Limited
Tools required for the Installation
• 6 inch hand benders • Chalk line • Cordless Drill • Cordless Shears (Battery Powered) • Hammer • Hand Break • Left and right sheet metal snips (Reds & Greens) • Measuring Tape • Safety Harness
Procedure: 00:36 - Step 1. Install the starter strip 01:02 - Step 2. Apply membrane 01:20 - Step 3. Apply ice and water shield 01:40 - Step 4. Install the valley flashing (if applicable) 02:35 - Step 5. Install the valley flashing (cont’d) 04:14 - Step 6. Place the adjustable starter in the valley 05:34 - Step 7. Install the gable 06:34 - Step 8. Caulk the valley 06:45 - Step 9. Apply Expandable M-Seal 07:12 - Step 10. Install the direct-to-deck metal panels I 07:30 - Step 11. Install the direct-to-deck metal panels II 08:54 - Step 12. Install the Snow Guard 09:38 - Step 13. Lock in panels and press panel edges 11:38 - Step 14. Installing difficult trim panels I 12:50 - Step 15. Installing difficult trim panels II 13:45 - Step 16. Installing difficult trim panels III 14:08 - Step 17. Install the trim line vent system 14:30 - Step 18. Install the ridge and hip caps
Please visit our website for more details:
Please also contact us at 905-890-5120 or email us at [email protected] for a free roof quote!
Warehouse: 375 Matheson Blvd East Mississauga, ON Canada L4Z 1X8
Read More
By: Steel Canada Roofing and Siding Limited Title: How to install a metal roof? | Direct-to-deck | Steel Canada Roofing and Siding Limited Sourced From: www.youtube.com/watch?v=Rr33-zr1qM4
